Pneumatics

Pneumatic Cylinders Supplier in Qatar

Single and double-acting pneumatic cylinders, from compact and round-body to ISO profile and guided cylinders, supplied by Power & Control Trading W.L.L. from Doha to plants, workshops and project sites across Qatar.

Genuine brands Delivery across Qatar Reply within 1 hour

Request a Quote WhatsApp Us

Pneumatic Cylinders at a glance

Cylinder types: Single & double-acting, ISO, compact, guided
Sizes: Small to large bore, standard & custom strokes
Brands: Parker, Bosch Rexroth and more
Supplied from: Doha, to sites across Qatar

Pneumatics

Pneumatic Cylinders

Single and double-acting pneumatic cylinders in ISO standard and compact designs, for automation, machine building and process equipment.

Action: Single-acting (spring return) or double-acting (powered in both directions).
Mounting: Foot, flange, clevis and trunnion mountings, with magnetic pistons for position sensors.

Single-actingDouble-actingISO 15552Compact

Quantity

Enquire on WhatsApp

We reply with price, availability and delivery time. Add the part number or size in the message if you have it.

What Is a Pneumatic Cylinder?

A pneumatic cylinder converts compressed air into straight-line (linear) motion. Air pushes a piston inside the barrel, and the piston rod moves to push, pull, lift, clamp or position a load. Each cylinder works with a directional control valve that sends air to one side of the piston or the other.

Tell us the bore, stroke and mounting of the cylinder you use today, or the force and speed the job needs, and we will supply the matching cylinder or an approved equivalent.

Types of Pneumatic Cylinders We Supply

From small round-body cylinders to heavy-duty ISO profile cylinders for new machines and replacements.

Single-acting cylinders

Air extends the rod and a spring returns it. Used for clamping, ejecting, pressing and short strokes where air saving matters.

Spring returnPush or pull

Double-acting cylinders

Air powers the rod in both directions, giving full force on extend and retract. The most common cylinder in automation.

Extend & retractCushioned

ISO profile & tie-rod cylinders

Standard-dimension cylinders that are interchangeable between makers, in profile-barrel and tie-rod designs.

ISO 15552Tie-rod

Compact & round-body cylinders

Short, space-saving cylinders for fixtures and tooling, plus mini round cylinders for light loads.

ISO 21287ISO 6432

Guided & rodless cylinders

Guided cylinders resist side loads and rotation; rodless cylinders give long strokes in a short installed length.

Guide rodsLong stroke

Rotary & special cylinders

Rotary cylinders, tandem and multi-position cylinders, and stainless steel cylinders for washdown and corrosive areas.

RotaryTandemStainless steel

Pneumatic Cylinders Specifications Available

Typical options. Tell us the bore, stroke and mounting and we will confirm the matching model.

Pneumatic Cylinders specifications
Cylinder types	Single-acting, double-acting, compact, round, ISO profile, tie-rod, guided, rodless, rotary
Bore sizes	Typically 8 mm to 320 mm
Stroke	Standard strokes and custom lengths
Standards	ISO 6432, ISO 15552, ISO 21287
Working pressure	Typically up to 10 bar
Mountings	Foot, front/rear flange, clevis, trunnion, rod eye and rod clevis
Materials	Anodised aluminium, stainless steel
Options	Magnetic piston for sensors, adjustable cushioning, non-rotating rod, high-temperature seals

How to Choose the Right Pneumatic Cylinder

Six details that decide which pneumatic cylinder is right. Share them with us and we will match it for you.

Force & bore

Work out the force needed and choose a bore that delivers it at your working pressure, with a safety margin.

Stroke

Measure the travel needed. Allow a little extra so the piston does not bottom out on the cover.

Action

Single-acting for short, one-direction work; double-acting when you need force in both directions.

Mounting & rod end

Match the mounting style and rod-end thread to your machine so the load stays in line with the rod.

Speed & cushioning

Fast or heavy loads need cushioning and correctly sized valves and flow controls to stop smoothly.

Environment

For outdoor, washdown or corrosive areas choose stainless steel and the right seal material.

Industries We Serve in Qatar

Manufacturing & assembly lines
Packaging & bottling
Food & beverage
Oil & gas and petrochemical
Water & wastewater treatment
Automotive & vehicle workshops
Construction & utilities
Printing & paper

Why Buy Pneumatic Cylinders from Power & Control?

Local stock in Doha

Common items available for immediate delivery across Qatar, depending on the quantity required.

Genuine products

Sourced from manufacturers and authorised channels, with datasheets and certificates on request.

Brand and origin of your choice

We match your project specification or approved vendor list.

Technical support

Help with selection, cross-referencing old part numbers and finding replacements for obsolete items.

Complete pneumatic supply

Pneumatic Cylinders, pneumatic valves, push fittings, pneumatic tubing and filter units from one supplier.

Get a quote

Send your part numbers, quantities or a photo of your existing item. We reply with price, availability and delivery time.

Request a Quote

How to Get a Quote

Send your requirement
Share the part number, brand, nameplate photo or the specification you need.
Get price & availability
We confirm the matching item or an approved equivalent, with price and lead time.
Delivery across Qatar
Stock items are delivered from Doha; special items are sourced internationally with clear lead times.

Pneumatic Brands We Supply

Genuine products sourced from the manufacturer or its authorised channel. Send us the part number of your existing item and we will supply the same item or a compatible alternative.

Need a brand that isn't listed? We source to your approved vendor list.

Complete your air system with matching components from the same supplier.

Pneumatic Cylinders FAQ

Can't find your answer? Our team usually replies within 1 hour during working hours.

Request a Quote

Where can I buy pneumatic cylinders in Qatar?

Power & Control Trading W.L.L. supplies pneumatic cylinders in Doha, Qatar, with delivery across the country. Call or WhatsApp +974 7133 7700 or email sales@pctqatar.com for a quote.

What is the difference between a single-acting and a double-acting cylinder?

A single-acting cylinder uses air to move the rod in one direction and a spring to return it. A double-acting cylinder uses air in both directions, so it has full force on extend and retract and the stroke can be longer.

How do I work out the cylinder bore I need?

Theoretical force equals air pressure multiplied by piston area. For example, a 50 mm bore at 6 bar gives about 1,180 N on the extend stroke. Choose a bore with a margin of 25–50% above the force the load needs to allow for friction and pressure drops.

What is an ISO 15552 cylinder?

ISO 15552 is the international standard for the mounting dimensions of profile and tie-rod cylinders from 32 to 320 mm bore. Cylinders built to it are interchangeable between manufacturers, which makes replacement easier.

What information do I need for a quotation?

The part number is enough if you have it. Otherwise, tell us the bore, stroke, action (single or double), mounting, rod-end thread, whether you need a magnetic piston, and the quantity.